Resistor 10 Ohm
Resistor 10 Ohm / 25 Watt
When changing the original indicators to LED or Halogen the indicating frequency is automatically altered. This is adjusted for parallel switched power resistors. The right selection of the suitable power resistors is listed in the table below.
If you are not sure which resistor you need, please donÂ’t hesitate to contact us via the contact form (Technical Dept) on our homepage.
When using micro 1000 DF and a light control bulb, 1 additional resistor at 33 Ohm for the rear light and 1 additional resistor at 7,5 Ohm for the brake light are required.
Required resistor when changing to Kellermann indicators (per indicator)
21 Watt power intake of original indicators
micro 1000 Halogen - 10 Ohm item 123.950
micro 1000 / micro Rhombus (yellow, white, Dark, DF, PL, Extreme) - 7,5 Ohm item123.952
BL 1000 Halogen (yellow, white, SG) - no ohmic resistor
BL 1000 LED (LED, Dark, PL) - 7,5 Ohm item 123.952
Required resistor when changing to Kellermann indicators (per side)
10 Watt power intake of original indicators
micro 1000 Halogen - 10 Ohm item 123.950
micro 1000 / micro Rhombus (yellow, white, Dark, DF, PL, Extreme) - 10 Ohm item123.950
BL 1000 Halogen (yellow, white, SG) - no ohmic resistor
BL 1000 LED (LED, Dark, PL) - 10 Ohm item 123.950
When changing the original indicators to LED or Halogen the indicating frequency is automatically altered. This is adjusted for parallel switched power resistors. The right selection of the suitable power resistors is listed in the table below.
If you are not sure which resistor you need, please donÂ’t hesitate to contact us via the contact form (Technical Dept) on our homepage.
When using micro 1000 DF and a light control bulb, 1 additional resistor at 33 Ohm for the rear light and 1 additional resistor at 7,5 Ohm for the brake light are required.
Required resistor when changing to Kellermann indicators (per indicator)
21 Watt power intake of original indicators
micro 1000 Halogen - 10 Ohm item 123.950
micro 1000 / micro Rhombus (yellow, white, Dark, DF, PL, Extreme) - 7,5 Ohm item123.952
BL 1000 Halogen (yellow, white, SG) - no ohmic resistor
BL 1000 LED (LED, Dark, PL) - 7,5 Ohm item 123.952
Required resistor when changing to Kellermann indicators (per side)
10 Watt power intake of original indicators
micro 1000 Halogen - 10 Ohm item 123.950
micro 1000 / micro Rhombus (yellow, white, Dark, DF, PL, Extreme) - 10 Ohm item123.950
BL 1000 Halogen (yellow, white, SG) - no ohmic resistor
BL 1000 LED (LED, Dark, PL) - 10 Ohm item 123.950